Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
DuPont chemical protective clothing 1422a
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
Employers should train all workers on the proper use and disposal of disposable ,protective clothing, based on the nature of the hazardous substances to which workers may be exposed and provide the proper collection containers, such as drums or suitably lined trash cans, for storing disposable ,clothing, that must be discarded.
To doff (or take off) clothing that has been used in a hazardous area, follow these steps for Field Decontamination: 1. Leave the contaminated area (or hot zone). If an SCBA unit is being used, make sure there is sufficient air remaining for the time it will take to 2.
Step, 3. ,Protective, Eyewear. Outside of goggles or face shield is contaminated. To ,remove,, handle by head band or ear pieces. Place reusable eyewear in designated receptacle for cleaning or discard disposable eyewear into waste container for disposal ,Step, 4. Gown. Gown front and sleeves are contaminated. Unfasten ties
personal protective clothing for use at an emergency. 6-I-1 Step 1: Don pants and boots, which includes suspenders in place. Step 2: Don hood. NOTE: Ensure ensemble is worn according to manufacturer’s guidelines or local standard operating procedures. Step 3: Don coat with closure secure and collar up.
Procedure (Donning ,Protective Clothing,) Wash hands; ,Remove, lab coat. Pick up the gown from the inside, near the openings for the arms. Let it fall open, but do not allow it to touch the floor. Put one arm in and then the other, so the opening is in the back. Tie the neck strings and then the waistband.
Step 2: Remove captive shoes / boots and put back on hangers (should be sole side up so the cleanliness can be checked and they can be easily cleaned.) Step 3: Sit on barrier and swing legs back over to other side. Step 4: Remove mob cap and beard snood Step 5: …
REMOVING PROTECTIVE CLOTHING These procedures should be followed when removing the protective suit. Perform the following steps: __ 1. Loosen the hood from the rest of the protective clothing, but do not remove. __ 2. Unfasten the hook and pile fastener tapes (1) at wrist of apron (if worn) and overgarment jacket. ___3. Loosen back tapes and remove
13 Wash hands and remove visible bodily fluids ; 14 Replace outer gloves with new gloves ; 15 Remove respirator or full face mask ; 16 Wash hands ; 17 Remove disposable gowns along with outer gloves (if used) 18 Wash hands and put on outer gloves ; 19 Enter Removal Area Number 1: 20 Wash hands and remove protective clothing ; 21 Wash hands